Loading...
11 results
Search Results
Now showing 1 - 10 of 11
- Intranasal delivery of nanostructured lipid carriers, solid lipid nanoparticles and nanoemulsions: a current overview of in vivo studiesPublication . Costa, Cláudia Pina; Moreira, João Nuno; Lobo, José Manuel Sousa; Silva, Ana CatarinaThe management of the central nervous system (CNS) disorders is challenging, due to the need of drugs to cross the blood‒brain barrier (BBB) and reach the brain. Among the various strategies that have been studied to circumvent this challenge, the use of the intranasal route to transport drugs from the nose directly to the brain has been showing promising results. In addition, the encapsulation of the drugs in lipid-based nanocarriers, such as solid lipid nanoparticles (SLNs), nanostructured lipid carriers (NLCs) or nanoemulsions (NEs), can improve nose-to-brain transport by increasing the bioavailability and site-specific delivery. This review provides the state-of-the-art of in vivo studies with lipid-based nanocarriers (SLNs, NLCs and NEs) for nose-to-brain delivery. Based on the literature available from the past two years, we present an insight into the different mechanisms that drugs can follow to reach the brain after intranasal administration. The results of pharmacokinetic and pharmacodynamics studies are reported and a critical analysis of the differences between the anatomy of the nasal cavity of the different animal species used in in vivo studies is carried out. Although the exact mechanism of drug transport from the nose to the brain is not fully understood and its effectiveness in humans is unclear, it appears that the intranasal route together with the use of NLCs, SLNs or NEs is advantageous for targeting drugs to the brain. These systems have been shown to be more effective for nose-to-brain delivery than other routes or formulations with non-encapsulated drugs, so they are expected to be approved by regulatory authorities in the coming years.
- Risperidone release from solid lipid nanoparticles (SLN): validated HPLC method and modelling kinetic profilePublication . Silva, Ana Catarina; Lopes, Carla Martins; Fonseca, J.; Soares, M.E.; Santos, D.; Souto, Eliana B.; Ferreira, D.A simple reverse-phase (RP) high performance liquid chromatography (HPLC) method was developed and validated, according to the International Harmonisation Guidelines (ICH), for the determination of risperidone (RISP) from solid lipid nanoparticles (SLN). Chromatographic runs were performed on a RP-C18 column, using an isocratic mobile phase of methanol, acetate buffer (0.05 M; pH 4.6) and triethylamine (60:40:0.02, v/v/v). The flow rate was 1 ml/min, the run time was 10 min and the RISP absorbance was measured at 280 nm, using UV detection. A linear response was obtained for a RISP concentration range of 0.25 - 10.00 g/ml (R2 = 0.9996), with a detection and quantification limits of 0.011 and 0.034 g/ml, respectively. The method was shown to be specific, precise at the intra-day (RSD < 0.796%) and inter-day (RSD < 0.331%) levels, and accurate with recoveries between 86.86 - 100.3% (RSD < 0.613%). Method robustness was observed as well. The suitability of the method for RISP quantifications was assessed by the determination of encapsulation parameters (encapsulation efficiency and drug loading) and by studying the RISP release profile from SLN. Kinetic models (zero order, Higuchi, Korsmeyer-Peppas and Baker-Lonsdale) were used to fit the obtained release profile and to predict the in vivo performance of RISP-loaded SLN. A combined pattern of diffusion and erosion release mechanism (anomalous non-Fickian transport) was found for the RISP-loaded SLN, which shows the ability of the system for controlled drug release.
- Lipid-based nanocarriers as an alternative for oral delivery of poorly water - soluble drugs: peroral and mucosal routesPublication . Silva, Ana Catarina; Santos, D.; Ferreira, D.; Lopes, Carla MartinsThe hydrophobic character of most drug molecules and their potential for degradation under the hostile environment of the gastrointestinal tract (GIT) constitutes the main obstacle in the development of a successful oral drug delivery system, since these are related to limitations of bioavailability and absorption processes. However, according to the advantages of the oral route, alternative ways of drug administration in the oral cavity should be considered. In this context, it is essential to have a systematic knowledge of the GIT and the oral cavity components, for a better understanding of the processes taking place during the oral administration of drugs. This review gives an overview of those anatomical and physiological features and elucidates about the current approaches employed to enhance the bioavailability of oral poorly water-soluble drugs. Strategies including the uses of lipid-based nanocarriers, such as nanoemulsions, liposomes and lipid nanoparticles are discussed, considering their ability to improve solubility, dissolution kinetics, absorption and, consequently, biopharmaceutical properties. Some toxicological concerns are also highlighted.
- Preparation, characterization and biocompatibility studies on risperidone-loaded solid lipid nanoparticles (SLN): High pressure homogenization versus ultrasoundPublication . Silva, Ana Catarina; González-Mira, E.; García, M.L.; Egea, M.A.; Fonseca, J.; Silva, R.; Santos, D.; Souto, Eliana B.; Ferreira, D.The suitability of solid lipid nanoparticles (SLN) for the encapsulation of risperidone (RISP), an antipsychotic lipophilic drug, was assessed for oral administration. The hot high pressure homogenization (HPH) and the ultrasound (US) technique were used as production methods for SLN. All the studies on the SLN formulations were done in parallel, in order to compare the results and conclude about the advantages and limitations of both techniques. The particle sizes were in the nanometer range for all prepared SLN formulations and the zeta potential absolute values were high, predicting good long-term stability. Optical analyses demonstrated the achievement of stable colloidal dispersions. Physicochemical characterization of dispersions and bulk lipids, performed by differential scanning calorimetry (DSC) and X-ray assays, support prediction of occurrence of drug incorporation in the SLN and good long term stability of the systems. The toxicity of SLN with Caco-2 cells and the existence of contaminations derived from the production equipments were assessed by the (4,5-dimethylthiazol-2-yl)2,5-diphenyl-tetrazolium bromide (MTT) assay. The results showed 90% of cell viability after SLN exposure, with no significant differences within all prepared formulations (p > 0.05). From this study, we conclude that SLN can be considered as efficient carriers for RISP encapsulation. Moreover, HPH and US revealed to be both effective methods for SLN production.
- Formulations based on Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) for cutaneous use: a reviewPublication . Garcês, A.; Amaral, M.H.; Sousa Lobo, J.M.; Silva, Ana CatarinaCutaneous use of lipid nanoparticles (solid lipid nanoparticles, SLN and nanostructured lipid carriers, NLC) has been showing promising results. These systems consist of low viscosity aqueous dispersions, being usually employed by means of semi-solid formulations with adequate consistency for skin application. This review addresses the cutaneous use of lipid nanoparticles for therapeutic and cosmetic applications. Initially, general information related to pharmaceutical semi-solid formulations is presented. Afterwards, the effects of SLN and NLC on the skin, and technological aspects related to semi-solid systems based on SLN or NLC are described. Finally, the most relevant studies related to the formulations based on SLN and NLC, for cosmetic and therapeutic applications, are reported. Notwithstanding the cutaneous use of SLN and NLC has been proposed for both local and transdermal delivery, the reported studies show promising results only for local application. In this sense, more research is required to better understanding the interaction mechanisms of lipid nanoparticles with skin lipids. Furthermore, the development of standard methods for skin experiments with nanoparticles is necessary.
- Long-term stability, biocompatibility and oral delivery potential of risperidone-loaded solid lipid nanoparticlesPublication . Silva, Ana Catarina; Kumar, A.; Wild, W.; Ferreira, D.; Santos, D.; Forbes, B.A solid lipid nanoparticles (SLN) formulation to improve the oral delivery of risperidone (RISP), a poorly water-soluble drug, was designed and tested. Initially, lipid-RISP solubility was screened to select the best lipid for SLN preparation. Compritol(®)-based formulations were chosen and their long-term stability was assessed over two years of storage (at 25 °C and 4 °C) by means of particle size, polydispersity index (PI), zeta potential (ZP) and encapsulation efficiency (EE) measurements. SLN shape was observed by transmission electron microscopy (TEM) at the beginning and end of the study. The oxidative potential (OP) of the SLN was measured and their biocompatibility with Caco-2 cells was evaluated using the (4,5-dimethylthiazol-2-yl)2,5-dyphenyl-tetrazolium bromide (MTT) assay. In vitro drug release and transport studies were performed to predict the in vivo release profile and to evaluate the drug delivery potential of the SLN formulations, respectively. The RISP-loaded SLN systems were stable and had high EE and similar shape to the placebo formulations before and after storage. Classical Fickian diffusion was identified as the release mechanism for RISP from the SLN formulation. Biocompatibility and dose-dependent RISP transport across Caco-2 cells were observed for the prepared SLN formulations. The viability of SLN as formulations for oral delivery of poorly water-soluble drugs such as RISP was illustrated.
- Solid lipid nanoparticles (SLN) - based hydrogels as potential carriers for oral transmucosal delivery of Risperidone: preparation and characterization studiesPublication . Silva, Ana Catarina; Amaral, M.H.; González-Mira, E.; Santos, D.; Ferreira, D.Two different solid lipid nanoparticles (SLN)-based hydrogels (HGs) formulations were developed as potential mucoadhesive systems for risperidone (RISP) oral transmucosal delivery. The suitability of the prepared semi-solid formulations for application on oral mucosa was assessed by means of rheological and textural analysis, during 30 days. Plastic flows with thixotropy and high adhesiveness were obtained for all the tested systems, which predict their success for the oral transmucosal application proposed. The SLN remained within the colloidal range after HGs preparation. However, after 30 days of storage, a particle size increase was detected in one type of the HGs formulations. In vitro drug release studies revealed a more pronounced RISP release after SLN hydrogel entrapment, when compared to the dispersions alone. In addition, a pH-dependent release was observed as well. The predicted in vivo RISP release mechanism was Fickian diffusion alone or combined with erosion.
- Improving oral absorption of samon calcitonin by trimyristin lipid nanoparticlesPublication . Martins, S.; Silva, Ana Catarina; Ferreira, D.C.; Souto, Eliana B.Solid lipid nanoparticles (SLN) composed of trimyristin (solid lipid) and poloxamer 407 (surfactant) were prepared by a w/o/w emulsion technique for the incorporation of Salmon calcitonin, and further explored as protein carriers for oral delivery. Trimyristin SLN showed a mean size diameter of 200 nm with an association efficiency for calcitonin of approx. 86%. The morphology of SLN was investigated by cryo-SEM and by AFM, revealing spheroid shape SLN with a smooth surface. The in vitro release of calcitonin occurred for a period of 8 h, under both gastric and intestinal simulated pH conditions, predicting suitable properties for oral administration. The pharmacological activity of the protein was evaluated following oral dosage of calcitonin-loaded SLN in rats. SLN lowered the basal blood calcium levels by up to 20% with 500 IU/kg dose sustaining hypocalcaemia over 8 h. The results indicate that incorporation of Salmon calcitonin into trimyristin SLN is a key factor for the improvement of the efficiency of such carriers for oral delivery of proteins.
- Intranasal lipid nanoparticles for the treatment of neurodegenerative diseasesPublication . Cunha, S.; Almeida, H.; Amaral, M.H.; Lobo, J.M. Sousa; Silva, Ana CatarinaBackground: treatments for neurodegenerative diseases are challenging, due to the absence of fully effective medicines. One of the major problems associated to these is the occurrence of non-targeting events, which leads to adverse effects and requires frequent dose administration. Methods: Researches have been performed to develop new drug delivery systems administrated by alternative routes. For example, the direct nose-to-brain delivery of drugs by means of lipid nanoparticles, such as solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC), has been showing promising results. Results: Among the advantages of intranasal administration is the avoidance of passing the blood-brain barrier (BBB) to reach the central nervous system (CNS), allowing the direct delivery of drugs to the brain by a noninvasive way, minimizing systemic exposure and prolonging residence time. This review article discusses the advantages of using SLN and NLC for direct nose-to-brain drug delivery. A brief reference to other lipid-based carriers (liposomes, nanoemulsions and microemulsions) is also provided. Conclusion: The benefits of using SLN and NLC for improve nasal drug delivery have been demonstrated by in vitro, ex vivo and in vivo experiments. However, more in vivo animal studies are needed for advance to human clinical trials and reach clinics.
- Using the quality by design (QbD) approach to optimize formulations of lipid nanoparticles and nanoemulsions: a reviewPublication . Cunha, Sara; Costa, Cláudia Pina; Moreira, João Nuno; Lobo, José Manuel Sousa; Silva, Ana CatarinaQuality-by-design (QbD) approach has been applied to optimize lipid-based nanosystems formulations, including solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC) and nanoemulsions, besides being increasingly requested by regulatory authorities. Different mathematical models and statistical tests have been used, with similar conclusions regarding the parameters that influence the physical features of the resulting nanosystems. These include, variations in composition (e.g. lipid(s) and/or emulsifier(s)) and manufacturing parameters (e.g. emulsification rate and/or time, sonication amplitude and/or time, and homogenization pressure and/or cycles). These are critical parameters that influence nanoparticle/globule mean size, polydispersity index, zeta potential, drug encapsulation efficiency and in vitro drug release. This review addresses the concepts and applications of QbD for the development of lipid-based nanosystems, reporting successful examples published in the last 2 years. Although, some limitations have been identified, it is expected that in the upcoming years the application of QbD in pharmaceutical development will be an established approach.